|
This High Heat Paint Product Is For
Industrial Use Only
All Directions Must Be
Followed For Safe Use Of This Product |
-
Do Not Use If You Have Asthma Or Other Breathing
Problems
-
Must Be Applied Outside In An Open Area Only
-
Flammable Fumes And Liquid Can Cause Flash Fire
-
Keep Away From Flames And Sparks - Do Not
Smoke
-
Cartridge Type Charcoal Respirator Required For
Organic Vapors
-
Eye Protection Required While Using
High Heat Paints
-
Make Sure All Electrical Equipment In Area Is
Properly Grounded
-
Follow All Precautions Labeled On This Product
-
Keep Out Of Reach Of Children - Harmful Or Fatal
If Misused
All fixtures and appliances must be clean and dry, free from
dirt, oils, old paint. Loose paint and damaged surfaces must be properly
repaired prior to applying this product.
Light sanding of surfaces will aid in adhesion of high heat
paints. Use 320 grit sand paper.
Mask any areas that will not be painted (glass, trim,
burners) with tape.
Make sure all dust is removed from the fixture, use a tack
cloth if needed.
Double check for any flame or ignition source before
proceeding
Spray the fixture with 2 coats of the high heat paint colored spray, waiting
1 hour between coats
After the 2 coats of high heat paint colored spray has been applied, wait one
hour more and then apply the gloss clear high heat coating. If 2 coats are required,
wait 1 hour between coats.
Allow to dry and harden for 12 hours before use.
This product is dangerous if misused. The customer or enduser(s) assumes
full responsibility for its proper use and application, as outlined in these
installation instructions.
The Bathtub Refinishing Referral Network will not be liability for incidental or consequential damages,
arising from the use, or misuse of these products. Any claims regarding
these products must be directed to the manufacturer. Product received
damaged during shipment must be reported to the shipping company within 24 hours of
receipt of damaged goods and the Bathtub Refinishing Referral Network must be
notified at
sales@refinishingonline.com
.
CARE AND CLEANING
Never clean fixtures with abrasive cleanser, or scrub pads. Do not use bleach. Keep out of reach of
children.
Returns: Any item returned due to damage in shipping or a defective
item, must receive an Identification
tag, prior to shipping the item back to the supplier. Tag is only available by emailing the Bathtub Refinishing
Referral Network at the above email address. We must be contacted within 24
hours of receiving a damaged or defective item. No item will be accepted
without an ID tag. Refunds will include replacement of the damaged or
defective product only and are provided from the manufacturer.
|
